Lucent Technologies Transtalk 9000 Cell Phone User Manual


 
Troubleshooting
5-5
Handset Problems (continued)Handset Problems (continued)
Handset Problems (continued)Handset Problems (continued)
Handset Problems (continued)
Symptom Possible Causes Possible Solutions
You can hear the
party on the other
end, but they cannot
hear you. MUTE
appears in the
handset display.
The M button was
pressed inadvertently.
Press M again to turn off the mute
feature.
Plug the battery charger into an outlet
not controlled by a switch.
Battery charger is
plugged into an electri-
cal outlet controlled by
a switch, and the
switch is turned off.
When placed in
the battery
charger's handset
cradle, the
handset does not
turn off.
Battery charger's power
cord is not inserted or is
not inserted properly.
1. Unplug the power cord/AC adapter
from the electrical outlet.
2. Disconnect the power cord/AC
adapter from the battery charger.
3. Carefully reconnect the power cord/
AC adapter to the battery charger.
4. Plug the power cord/AC adapter
back into the electrical outlet.
Handset does not
ring or vibrate.
Enable the alerter and/or the vibrator.
Alerter is disabled and
vibrator is disabled.