Filter
Top Products
3-10 Using the MDW 9030P Pocketphone
To enable Line Preselection, use the following procedure:
1. Make sure the handset is turned off.
2. Press and hold the Select button (") for three seconds.
3. While still holding ", press O.
The handset beeps twice, and the display shows the handset settings, indicating you
are in Local Mode. (While in Local Mode, the MDW 9030P can still receive notification
of incoming calls.)
If Line Preselection is enabled, PSEL shows on the top line of the display. For ex-
ample:
If Line Preselection is disabled, no icon appears.
4. Press and hold "P" (7) for three seconds.
The handset display shows PRESELECTION:ON if Line Preselection is enabled or
PRESELECTION:OFF if Line Preselection is disabled. For example:
5. Press " to toggle between ON and OFF to enable or disable Line Preselection.
6. Press O to exit Local Mode.