Filter
Top Products
Using the MDW 9030P Pocketphone 3-17
Using a HeadsetUsing a Headset
Using a HeadsetUsing a Headset
Using a Headset
Lucent Technologies offers the Supra 9030 headset, which is specifically designed for
use with your MDW 9030P wireless phone. A headset assists in call answering, and
provides hands-free operation.
For ordering information, see "Ordering Replacement & Optional Parts" in Chapter 4.
To use the Supra 9030 headset, hold its cord with the "UP" label facing you, and insert the
plug directly into the headset connector on the bottom of the handset (near the mouth-
piece).
CAUTION:CAUTION:
CAUTION:CAUTION:
CAUTION:
Plug ONLY the Supra 9030 headset cord into the headset connector.
NOTE:NOTE:
NOTE:NOTE:
NOTE:
Calls cannot be heard on the handset receiver when the headset is plugged in to the
headset connector. The handset microphone is also deactivated. The range of the handset
is slightly diminished when you are using a headset. You may need to move closer to
the radio module, or move the radio module closer to you.
If desired, you can disconnect the headset from the handset without dropping the call. Just
unplug the headset cord from the handset. You can then use the handset as you normally
would.
Using the Headset On/Off ButtonUsing the Headset On/Off Button
Using the Headset On/Off ButtonUsing the Headset On/Off Button
Using the Headset On/Off Button
The headset On/Off button near the antenna becomes active only when the headset is
plugged into the headset connector. The headset On/Off button is identical in function to the
O button near the dialpad.
Answering Calls with a HeadsetAnswering Calls with a Headset
Answering Calls with a HeadsetAnswering Calls with a Headset
Answering Calls with a Headset
When you receive a call, you will hear a ringing tone or feel a vibration coming from the
handset (you will not hear a tone from the headset itself). To answer the call, press either
the headset On/Off button near the antenna or the O button near the dialpad.