Filter
Top Products
MDW 9030P Pocketphone Compatibility
6-5
MERLIN SystemsMERLIN Systems
MERLIN SystemsMERLIN Systems
MERLIN Systems
■
On MERLIN II and MERLIN LEGEND systems, you must connect your wireless phone
to an available jack on either a 408 outside line/analog telephone module or a 008
analog telephone module.
■
Since the MDW 9030P does not have a speaker function, the Voice Announce feature
must be disabled. It is recommended that you use MERLIN 206/410/820 systems
installed with Feature Package 2 with your wireless phone, so that you can disable that
feature.
■
Since the MDW 9030P has no speaker function, it should not be assigned to a paging
group.
■
To program the Ringing Option feature, use the “triangle” and “rectangle” indicators
in the display as the equivalent of red and green LEDs, respectively.
■
For MERLIN II system users, if you program an Auto Intercom button, idle line preference
must be set to intercom.
■
If any of your incoming lines has the call waiting feature, use the Recall feature (letter "C" in
the display) and press it before you pick up a waiting call. You can dial #50 before you
pick up a waiting call on the following: MERLIN 206/410/820 systems only with Feature
Package 2, and all MERLIN Plus, MERLIN II, and MERLIN 1030/3070 systems. Pressing the
O button disconnects the call.
■
The / button on the MDW 9030P allows you only to enter programming mode. It
does not work when using MERLIN LEGEND system features. To use MERLIN LEG-
END system feature codes with this phone, program any available button as a System
Feature button. This enables you to use the wide array of MERLIN LEGEND system
features by turning the set on, pressing the System Feature button, and dialing the
appropriate “ * ” code number.