Lucent Technologies Transtalk 9000 Cell Phone User Manual


 
Using the MDW 9030P Pocketphone 3-7
3
4
2
1
Volume ControlVolume Control
Volume ControlVolume Control
Volume Control
To increase or decrease the volume of the handset alerter or the receiver (earpiece):
Alerter: Press the “+” or the “” button while the MDW 9030P is awake but turned off.
If the display is dark (the phone is in "sleep" mode), press " to wake it up, then press
the “+” or the “” button.
Receiver: Press the “+” or the “” button while the MDW 9030P is turned on.
Carrying Your PocketphoneCarrying Your Pocketphone
Carrying Your PocketphoneCarrying Your Pocketphone
Carrying Your Pocketphone
The MDW 9030P Pocketphone has a loop in the upper corner to accommodate the included
lanyard. You can attach the lanyard, as illustrated above, and slip the lanyard over your
wrist to guard against dropping the phone. A leather carrying case is also available
separately (see "Ordering Replacement & Optional Parts" in Chapter 4).
The MDW 9030P Pocketphone also comes with a detachable clip, which you can attach to
the back of the battery pack, that enables you to attach the phone to your belt or purse
strap. To attach the clip to the battery pack, do the following:
Remove the battery pack from the hand-
set, as described in "Inserting and
Removing the Handset's Battery Pack" in
Chapter 2.
Place the two metal tabs on the clip into
the slots on the battery pack, with the
"hooks" toward the bottom of the battery pack.
Slide the clip toward the bottom of the
battery pack to engage the hooks.
Reinsert the battery pack in the handset,
as described in "Inserting and Removing
the Handset's Battery Pack" in Chapter 2.
+
Lanyard Loop
+ and
– Volume Control Buttons