Mitutoyo LSM-6900 Manual

A SERVICE OF

next previous

2 - 2

No. 99MBC071A

Step 2: Attaching the ID unit

1.Loosen the two screws that secure the ID unit protection cover at the left on the

real panel of the Display Unit and remove the cover by sliding it rightward.

2.Remove the dummy ID unit (amber) that has been mounted at the left of the

“TRANSMITTER-1” connector on the rear panel of the Display Unit, then insert

the ID unit (beige) that comes in the same package as the Measuring Unit.

This ID unit stores critical data that ensures the accuracy of the Measuring Unit

and has the same serial number as the accompanying Measuring Unit. Confirm that

these two numbers are identical before inserting the ID unit.

SCAN SIG.-1ID UNIT 1

TRANSMITTER-1

REMOTE INTERLOCK

ID

ID unit

ID unit slot

ID unit

Measuring unit

Serial number

label

3.Replace and secure the ID unit protection cover reversing the procedures in step 1

above.