4 - 13
No. 99MBC071A
4. SETTING UP THE MEASURING CONDITIONS
d. Setting the group judgment (Guidance: )
Set whether to use the group judgment function.
: Does not use the group judgment function.
: Uses the group judgment function.
(Default setting:
)
PROG
Step 1: Each time the key is pressed the displayed
setup option toggles between and .
While the desired setup option is flashing, press
the
ENT
key. If is selected, the opera-
tion proceeds to B4: Setting the use of RS-232C
baud rate, and if is selected, the operation
enters the process for setting the group judgment
result output function.
e. Setting the group judgement output (Guidance: )
Set whether to output the group judgment result to the RS-232C/GP-IB interface.
: Does not output the group judgment result to the RS-232C/GP-IB interface.
: Outputs the group judgment result to the RS-232C/GP-IB interface.
(Default setting: )
PROG
Step 1: Each time the key is pressed the displayed
setup option toggles between and .
While the desired setup option is flashing, press
the
ENT
key. The operation automatically
proceeds to B4: Setting the use of RS-232C port.
