3 - 26
No. 99MBC071A
SET
ENT
LIMIT
SET
MASTER
OFFSET
SET
SET
ENT
ENT
REF
SET
LIMIT
MASTER
OFFSET
MASTER
OFFSET
SHIFT
REF
ENT
Key name • In the ready state
• In the display-latched state
• At single-run measurement
• At continuous-run measurement
• At setup
• Combined use with power-on
• operation
• Directly enters the setup mode for
• GO/NG judgment.
• Performs zero-setting (in the
• positive direction) if an offset value
• is not set.
• If an offset value is set, executes
• the offset function with the offset
• value being set.
• Update of the setup data for the
• offset function must be performed
• in the function setup mode.
• Directly enters the setup operation
• for the reference value and scale
• value.
• If "Copying the target value to the
• reference value" is specified in the
• basic setup, only the setup
• operation for the scale value takes
• place.
• Directly enters the setup for
• mastering.
• If no offset value is set, an error
• results.
• Enters the function setup mode.
• Operation error
• Operation error
• Operation error
• Press to complete the setup
• operation and return to the ready
• state.
• Press or to abort the
• setup operation and return to the
• ready state.
• Operation error • Operation error • Accepts the setup data that is
• pressed.
• Operation error
• Operation error
• Press to complete the setup
• operation and return to the ready
• state.
• Press or to abort the
• setup operation and return to the
• ready state.
• Operation error
• Press to complete the setup
• operation and return to the ready
• state.
• Press or
• to abort the setup operation and
• return to the ready state.
• Exits from the function setup mode
• and returns to the ready state.
• Enters the state that is entered just
• after the power is turned on, if in
• the basic setup mode.
• + power-on is used to enter
• the basic setup mode.
