A SERVICE OF

logo

6 - 55
No. 99MBC071A
6. INTERFACE UNIT
6.3.1 Digimatic Output Unit
Using the provided connecting cable, connect the Digimatic Output Unit to connector
CN14.
Fit the connecting cable to the cut on the connector CN14 and firmly connect them.
Firmly tighten the Digimatic Output Unit mount plate with two screws as shown.
10 1
CN14
Digimatic Output Unit
CN14
Connect the connecting cable to CN14.
Cut on CN14
6.3.2 Second Analog I/O, BCD, and GP-IB interfaces
Using the provided connecting cable, connect the interface unit to connector CN9.
Fit the connecting cable to the cut on the connector CN9 and firmly connect them.
Firmly tighten the Interface Unit mount plate with two screws as shown.
CN9
34
33
2
1
Connect the connecting cable to CN9
Cut on CN9CN9
Interface unit