4 - 35
No. 99MBC071A
4. SETTING UP THE MEASURING CONDITIONS
4.5.3.5 Analog voltage output and scale value
The analog voltage output is determined from (Measured data - reference value) x scale value
(gain), and therefore varies depending on the resolution set on each Measuring Unit, as
shown in the following table.
Table 1: Metric units (The upper limit of the analog output must be within the range of actual
measurements)
)1(eulavelacS tinuyalpsidehtnotuodaermuminiM
rebmuN10.0 µm20.0 µm50.0 µm1.0 µm
1
noituloseR10.0/Vm5.2 µm20.0/Vm5.2 µm50.0/Vm5.2 µm1.0/Vm5.2 µm
tuptuomumixaM ± 02/V5 µm ± 04/V5 µm ± 001/V5 µm ± 002/V5 µm
2
noituloseR1.0/Vm5.2 µm2.0/Vm5.2 µm5.0/Vm5.2 µm1/Vm5.2 µm
tuptuomumixaM ± 002/V5 µm ± 004/V5 µm ± mm1/V5 ± mm2/V5
3
noituloseR1/Vm5.2 µm2/Vm5.2 µm5/Vm5.2 µm01/Vm5.2 µm
tuptuomumixaM ± mm2/V5 ± mm4/V5 ± mm01/V5 ± mm02/V5
)2(eulavelacS tinuyalpsidehtnotuodaermuminiM
rebmuN2.0 µm5.0 µm1µm2µm
1
noituloseR2.0/Vm5.2 µm5.0/Vm5.2 µm1/Vm5.2 µm2/Vm5.2 µm
tuptuomumixaM ± 004/V5 µm ± mm1/V5 ± mm2/V5 ± mm4/V5
2
noituloseR2/Vm5.2 µm5/Vm5.2 µm01/Vm5.2 µm02/Vm5.2 µm
tuptuomumixaM ± mm4/V5 ± mm01/V5 ± mm02/V5 ± mm04/V5
3
noituloseR02/Vm5.2 µm05/Vm5.2 µm001/Vm5.2 µm002/Vm5.2 µm
tuptuomumixaM ± mm04/V5 ± mm001/V5 ± mm002/V5 ± mm004/V5
)3(eulavelacStinuyalpsidehtnotuodaermuminiM
rebmuNmµ5mµ01mµ001
1
noituloseRmµ5/Vm5.2mµ01/Vm5.2mµ001/Vm5.2
tuptuomumixaMmm01/V5± mm02/V5± mm002/V5±
2
noituloseRmµ05/Vm5.2mµ001/Vm5.2mm1/Vm5.2
tuptuomumixaMmm001/V5± mm002/V5± mm0002/V5±
3
noituloseRmµ005/Vm5.2mm1/Vm5.2mm01/Vm5.2
tuptuomumixaMmm0001/V5± mm0002/V5± mm00002/V5±
