3 - 28
No. 99MBC071A
H.CAL
SET
SET
ENT
ENT
L.CAL
READ
SET
SET
READ
READ
H.CAL
L.CAL
SHIFT
Key name
In the ready state
In the display-latched state
At single-run measurement
At continuous-run measurement
At setup
Combined use with power-on
¥ operation
Enters the LOW CAL setup mode.
Operation error
This is used to enter the setup mode
¥ for the setup item that is being
¥ displayed in the upper section of the
¥ display unit.
Enters the detection mode of the
¥ measurement position
¥ (focal position).
Press or to restore the
¥ ready state.
Enters the HIGH CAL setup mode.
Operation error
Operation error
Operation error
Move left key
Operation error
Operation error
Move right key
Operation error
Operation error
Up key to increment the setup value.
Operation error
Operation error
Down key to decrement the setup
¥ value.
Operation error
Operation error
(Input of gage diameter) +
¥ executes LOW CAL.
Press or in the
¥ LOW CAL setup mode to abort the
¥ setup operation and return to the
¥ ready state.
Reads the measurement of the
¥ reference gage as the setup value.
The read value can be modified with
¥
the , , ,
¥
and keys.
If this entry is made when the
¥ function setup item number is
¥ flashing in the function setup mode,
¥ which was accessed by the
key, the setup operation for
¥ the light amount detection is entered.
(Input of gage diameter) +
¥ executes HIGH CAL and illuminates
¥ the measurement state guidance ( )
¥ for CAL.
Press or in the HIGH CAL
¥ setup mode to abort the setup
¥ operation and return to the ready
¥ state.
