Filter
Top Products
2 - 14
Turning Power On/Off
To turn the terminal On, press and release the Power button .
To turn the terminal Off:
1. Press and hold the Power button until the Phone Options menu displays.
Note: If the Show System Dialog setting is turned off (see page 6-2), the Phone Options menu does not
display when you press and hold the Power button. The terminal automatically reboots when Power
button is held for approximately 8 seconds.
2. Touch Power Off.
Suspend Mode
Suspend mode differs from Power off mode. Power off mode is the equivalent to having no battery or
external power source connected to the device. The terminal does not receive incoming calls when
power is off since the device completely shuts down. In Suspend mode, the device enters a low power
state to conserve battery power. The radio associated with the phone maintains enough power to wake
the terminal for incoming phone calls.
Suspend mode automatically turns the touch screen off and locks the terminal to save battery power
when the terminal is inactive for a programmed period of time.
1. Press and release the Power button to toggle the terminal in or out of Suspend mode.
Note: If the Power key setting has been turned off (disabled), pressing and releasing the key has no effect.
See Display Settings on page 6-2.
2. Drag the to the right or press the Menu button to unlock the terminal.
Note: You should always place the terminal in Suspend mode before removing the battery. For information on
removing the battery, see Replacing the Battery.
To adjust the timeout limit, touch All Apps > Settings > Display > Sleep.
Airplane Mode
Turn On Airplane mode to disable all the terminal radios that transmit voice or data.
1. Press and hold the Power button until the Phone Options menu displays.
Note: If the Show System Dialog setting is turned off (see page 6-2), the Phone Options menu does not
display when you press and hold the Power button. The terminal automatically reboots when Power
button is held for approximately 8 seconds.
To enable Airplane mode when the Show System Dialog setting is off, touch > Settings .
Under the “Wireless & Networks” heading, select More. Check the box next to Airplane Mode.
2. Touch Airplane Mode to toggle the mode on or off.
Note: When Airplane Mode is turned on, shows on the status bar.