Filter
Top Products
4 - 3
Using the Scan Demo to Decode a Bar Code
The Scan Demo demonstrates the functionality of the integrated scan image engine in the terminal and
is not intended as a functional business solution. Detailed information on how to create custom applica-
tions for your Dolphin terminal is provided in the Software Development Kit (SDK), available for download
at www.honeywellaidc.com.
1. Touch All Apps > Demos > Scan Demo to open the Scan Demo application.
2. Point the Dolphin terminal at the bar code.
Note: For optimum performance, avoid reflections by scanning the bar code
at a slight angle.
3. Touch and hold Scan or press and hold the Scan button. Center the
aiming beam over the bar code; see Aiming Beam on page 4-6.
Note: By default, the left and right side buttons also trigger the scan/imager.
4. The bar code is decoded and the results appear on the screen.
Automatic Scanning
Enable Automatic scanning mode to activate the imager for continuous scanning without requiring the
operator to touch Scan for each bar code presented in the field of view of the imager. To configure the
time interval between scan attempts, see Auto Scan Delay under Configuring the Scan Demo
Application (page 4-4).
1. Slide the Automatic blue button to the ON position to enable the feature.
Decode Results
Touch the dots or swipe
left or right to scroll
through the decode
results of past scans.
Scan Statistics
See Configuring the Scan
Demo Application on page 4-4.