Filter
Top Products
3 - 18
a. Remove the battery door and release the battery retention strap.
b. Pull the battery latch back and remove the battery. Do not pull on the battery retention strap
when attempting to remove the battery.
3. Lift the card retention flap for the appropriate socket.
4. If you are replacing the memory card, slide the existing card out of the memory socket.
Note: Memory card use is recommended to avoid potential application errors or possible data loss.
5. Slide the SIM and/or replacement memory card (contacts facing down) into the appropriate socket,
and then close the retention flap.
6. Insert the battery. Secure the battery retention strap if applicable for your model type.
7. Install the battery door. Apply pressure to the edges of the battery door to ensure the door is
properly closed. Engage the battery door lock if applicable for your model type. The terminal begins
booting as soon as power is applied.
Battery Latch
Battery
Retention
Strap
SIM Card
Retention Flap
Memory Card
Retention Flap
Memory Card
SIM Card
Chamfered Corner
of SIM Card