Filter
Top Products
3 - 6
Scan Button
The Scan button is centrally located for easy access with the right or left hand. When pressed,
the Scan button activates the scanner/imager. The Scan button also functions as a system
wake-up control for the terminal. You can reassign the button to launch applications or execute
commands; see Hotkeys on page 2-12.
Touch Panel Display
The color 4.3 inch (liquid crystal display (LCD) touch panel is covered with an industrial,
protective lens for greater durability. The wide video graphic array (WVGA) display resolution
is 800 X 480. The touch panel can be activated with a finger or with the optional stylus.
The touch panel backlight illuminates when the screen is touched. To conserve battery power
the touch screen dims then darkens automatically after a period of no activity. Press the Power
button, and then drag the unlock icon to the right or press the Menu button to wake the terminal
and access the last screen viewed. See Display Settings on page 6-2 for information on how
to adjust sleep (timeout) settings.
USB Door/Micro USB Port
The Micro USB port is located under the protective USB door on the right side of the terminal.
To access the micro USB port, gently lift the top edge of the door closest to the digital
microphone, and then rotate 90° counterclockwise.
The micro USB port in conjunction with the USB Charge/Communication Cable (model 70e-
USB) powers the terminal, charges the main battery, and facilitates communication. The micro
USB port supports low, full, and high-speed USB v2.0 client communication with a maximum
rate of 480 Mbps.
For additional information, see Using the USB Charge/Communication Cable (Model 70e-USB
ADAPTERKIT) on page 2-4 and Connecting the Terminal to a Computer via a USB Connection
on page 2-19.
WAN Notification LED
The light emitting diode (LED) located above and to the left of the LCD display flashes and
illuminates for WAN notifications (e.g., a missed call, new voice mail, SMS message, or email).
The notification LED flashes when the terminal is active or stays on steady when the terminal
is in Suspend mode.