Filter
Top Products
4 - 4
2. Touch Scan or press the Scan button to activate the imaging engine. Once activated, the imager
automatically scans and decodes bar codes presented in the field of view.
3. Touch Scan or press the Scan button to deactivate the imager.
4. Slide the Automatic blue button to the OFF position to disable the feature.
Continuous Scanning
Enable Continuous scanning mode to activate the imager for continuous scanning only when the
operator touches and holds Scan or presses and holds the Scan button. The time interval between scan
attempts is minimal and not configurable.
1. Slide the Continuous blue button to the ON position to enable the feature.
2. Touch and hold Scan or press and hold the Scan button to activate the imaging engine.
The imager scans and decodes bar codes presented in the terminal’s field of view as long as Scan
or the Scan button is pressed.
3. Release Scan or the Scan button to deactivate the imager.
4. Slide the Continuous blue button to the OFF position to disable the feature.
Configuring the Scan Demo Application
1. Open the Scan Demo application, and then press the Menu button .
2. Touch Setting or Symbology Setting .
Touch Symbology Setting
to access the Symbologies
Settings screen.
Tou ch Setting to access the
Scan Demo settings screen.