Filter
Top Products
48 Getting Started
Getting Started 49
Icon Description
Long Press End Key Lets you set the behavior when you press and hold
the END key.
Memory Check the device memory allocation status and memory card
information. You can also stop currently running programs.
Microphone AGC Adjust the volume of your voice automatically when
you are recording.
Power Check the remaining battery power. You can also set the timeout
for turning off the display (switching device to Sleep mode) to conserve
battery power.
Regional Settings Set the regional configuration to use, including the
format for displaying numbers, currency, date, and time on your device.
Remove Programs Remove programs that you installed on your device.
Screen Change the screen orientation, re-calibrate the screen, and
change the screen text size.
Task Manager Stop running programs and set the Exit button
( ) to end programs immediately when you tap the button. For more
information, see "Task Manager" in Chapter 12.
TouchFLO You can enable or mute the finger scrolling and panning
sound. See "TouchFLO settings" in this chapter for details.
Windows Update Update Windows Mobile® on your device with the
latest updates, security patches or fixes, if they are available.
Connections tab
Icon Description
Beam Set your device to receive incoming Bluetooth beams.
Bluetooth Turn Bluetooth on, set your device to visible mode, and scan
for other Bluetooth devices.
Comm Manager Manage your device’s connections (including GPRS/3G,
Bluetooth, and ActiveSync), turn the phone on or off, switch to ringer/
vibration mode, enable or disable the Direct Push function, and more.
Connection Setup Configure your device’s data connections, such
as GPRS, WAP, and MMS, based on the detected or selected network
operator. See Chapter 10 for details.
Connections Set up one or more types of modem connections for your
device, such as phone dial-up, GPRS, and more, so that your device can
connect to the Internet or a private local network.
CSD Line Type Set the line type to use when making a circuit switch
data (CSD) connection. Normally, you do not need to change the setting
unless you encounter a problem on establishing a connection.
GPRS Setting Set the GPRS authentication method.
HSDPA Turn on or off High Speed Data Packet Access (HSDPA), a 3.5G
high-speed digital data service that provides downstream data rates up
to 3.6 Mbps. Your wireless service provider must support this feature to
be able to turn it on.
Network Cards Set up your device's network card.
SMS Service Set your device to send SMS text messages via a data
connection, such as GPRS or a circuit-switched connection.
USB to PC Set a USB serial connection between your device and PC
when there are problems connecting ActiveSync.