A SERVICE OF

logo

Open as PDF
next previous
Figure 42: General OSPF Configuration
Select the Add button to add an area (see Figure 43).
Figure 43: Add an OSPF Area
Configure the OSPF interface settings in the Configuration screen (Figure 44). If OSPF is enable, the parameters
contain the correct default values. The OSPF values are editable only when OSPF is enabled on the interface.
Figure 44: Edit OSPF VLAN Settings
OSPF monitoring is available from an IP Routing sub-section (Controller > IP Routing > Routing). Both Static
and OSPF routes are available in table format.
OSPF Interfaces and Neighboring information is available from the OSPF tab. The Interface information includes
transmit (TX) and receive (RX) statistics.
DellPowerConnectW-SeriesArubaOS6.2 | User Guide OSPFv2 | 156