Timer Description
Logon User Lifetime Maximum time, in minutes, unauthenticated clients are allowed to remain logged
on.
Range: 0–255
Default: 5 minutes
User Interim stats frequency Set the timeout value for user stats reporting in minutes or seconds. The
supported range is 300-600 seconds, or 5-10 minutes, and the default value is 600
seconds.
Setting an Authentication Timer
To set an authentication timer, complete one of the following procedures:
Using the WebUI
1. Navigate to the Configuration > Security > Authentication > Advanced page.
2. Configure the timers as described above.
3. Click Apply before moving on to another page or closing the browser window. If you do not perform this step,
the configuration changes are lost.
Using the CLI
The following commands configure timers you can apply to clients. If the optional seconds keyword is not specified
for the idle-timeout and stats-timeout parameters, the value defaults to minutes.
(host)(config) #aaa timers
dead-time <minutes>
idle-timeout <time> [seconds]
logon-lifetime <0-255>
stats-timeout <time> [seconds]
DellPowerConnectW-SeriesArubaOS6.2 | User Guide Authentication Servers | 188
