A SERVICE OF

logo

In the WebUI
1. Navigate to the Configuration > Security > Access Control > User Roles page.
2. Click Edit for the user role.
3. Under VPN Dialer, select the dialer you configured and click Change.
4. Click Apply.
In the CLI
To configure the captive portal dialer for a user role via the command-line interface, access the CLI in config mode
and issue the following commands:
(host) (config) #user-role <role>
dialer <name>
DellPowerConnectW-SeriesArubaOS6.2 | User Guide VirtualPrivateNetworks | 295