A SERVICE OF

logo

Open as PDF
next previous
l The command line interface (CLI) allows you to configure and manage Dell controllers. The CLI is accessible
from a local console connected to the serial port on the controller or through a Telnet or Secure Shell (SSH)
session from a remote management console or workstation.
NOTE: By default, you can only access the CLI from the serial port or from an SSH session. To use the CLI in a Telnet session, you
must explicitly enable Telnet on the controller.
DellPowerConnectW-SeriesArubaOS6.2 | User Guide TheBasicUser-CentricNetworks | 78