A SERVICE OF

logo

Open as PDF
next previous
Figure 283: Certificate Information
c. Click the Authentication tab. In the resultant window, click the Add tab and select EAP/PEAP. Move this
option to the top of the list if PEAP is the method chosen. If certification validation not required, uncheck
the Validate server certificates setting.
d. Click the PEAP Settings tab and select the EAP protocol supported.
e. Click OK.
f. To modify an existing profile, select the profile and then click the Properties tab.
4. Select the Network tab to configure the network for wireless client. For wired clients, skip this step.
Figure 284: Network Profile
a. Click the Add tab. Enter the SSID to which the client connects.
DellPowerConnectW-SeriesArubaOS6.2 | User Guide AdvancedSecurity | 680