853 | DellPowerConnectW-SeriesArubaOS6.2 | User Guide
n Network Authentication: WPA2
n Data Encryption: AES
l For an SSID using WPA2-PSK, enter the following:
n Network Authentication: WPA2-PSK
n Data Encryption: AES
n Enter the pre-shared key
NOTE: Do
not
select the option “This is a computer-to-computer (ad hoc) network; wireless access points are not used”.
Figure 419 shows the configuration for the SSID WLAN-01 which uses WPA network authentication with TKIP
data encryption.
Figure 419: Wireless Network Association
7. Click the Authentication tab to enter the 802.1x authentication parameters for the SSID. This tab configures
the EAP type used between the wireless client and the authentication server.
Configure the following, as shown in Figure 420:
l Select Enable IEEE 802.1x authentication for this network.
l Select Protected EAP (PEAP) for the EAP type.
l Select Authenticate as computer when computer information is available. The client will perform computer
authentication when a user is not logged in.
