Filter
Top Products
CHAPTER 5 NDA-24305
Page 86
Revision 1.0
INCOMING CALL IDENTIFICATION-PRI
I-24 INCOMING CALL IDENTIFICATION-PRI
1. General Description
This feature allows an ATTENDANT CONSOLE [A-3] to visually identify the type of service and/or trunk
group which is arriving or waiting to be answered.
2. Operating Procedure
No manual operation is required.
3. Programming
STEP 1: ASYD - System data 2, Indexes 8 & 9, flag the type of incoming calls the Attendant Console should
expect.*
Index 8
bit 0: Listed Directory Number
bit 1: Incoming Station Call
bit 2: Attendant Recall
bit 3: FX
bit 4: WATS
bit 5: CCSA (DID)
bit 6: TIE Line
bit 7: Call Forwarding Busy Line
Index 9
bit 0: Call Forwarding Don’t Answer
bit 1: Call Forwarding Intercept
bit 2: Special Common Battery Station
bit 3: Interposition Transfer
* System Data 2, Index 8, bits 6 & 7, and System Data 2, Index 9, bits 0-3 can be assigned different meanings
via the AAKP command.
STEP 2: ARTD - Flag the type of route in CDN 6, Trunk Class (TCL).
0: Not used
1: DDD Line (LDN)
2: FX Line (FX)
3: WATS Line (WATS)
4: TIE Line (TIE)
5: CCSA Line (CCSA)
6: Toll Line
7: CAS Line
8: Paging
9: Not used
10: Not used
11: General page
12: Radio page