Filter
Top Products
NDA-24305 CHAPTER 6
Page 255
Revision 1.0
CNIP/CONP
6. When a call is transferred using Consultation Hold and Voice Call, Name ID of the calling party is not
displayed on the transferred party's D
term
LCD.
7. This service cannot be used in conjunction with the ISDN Information Transfer service.
8. The transfer rate is 64 kbps. Bearer Capabilities are as follows:
•Speech
• 3.1 kHz audio
• 7 kHz audio
9. When Name ID is not assigned, the calling or called party's number is displayed.
10. When both 8-digit display and 16-digit display are used for this feature, the calling or called party's name is
displayed as shown in the table below.
11. When 16-digit display is in service, MULTIPLE LINE OPERATION is not available for the D
term
.
12. When originating a call to a Q-SIG line using a D
term
sub line, Name ID of the D
term
sub line is sent to the
called party.
13. CONP is available only for Prime Line of the calling party.
14. The characters displayed by this service are English alphabets, numerals and symbols of JIS unit codes
conforming to ISO-8859-1.
15. This service is available only for the D
term
equipped with LCD.
16. This service does not support Calling/Connected Name Identification Restriction (CNIR) conforming to
ETS 300 238.
ORIGINATING OFFICE
→TERMINATING OFFICE
CALLING PARTY'S NAME ID
DISPLAY
CALLED PARTY'S NAME ID DISPLAY
16 digits → 8 digits Bottom Line: 16 digits
(Right 8 digits: Blank)
Top Line: 8 digits
(Front 8-character display)
8 digits → 16 digits Top Line: 8 digits
(Front 8-character display)
Bottom Line: 16 digits
(Right 8 digits: Blank)
8 digits → 16 digits → 8 digits Top Line: 8 digits Top Line: 8 digits
16 digits → 8 digits → 16 digits Bottom Line: 16 digits Bottom Line: 16 digits