Filter
Top Products
CHAPTER 5 NDA-24305
Page 58
Revision 1.0
CALL PARK-PRI
C-119 CALL PARK-PRI
1. General Description
This feature enables the Attendant(s) or station users to “Park” calls from the ISDN network against their own
station numbers. Calls can easily be retrieved from any station within the system.
2. Operating Procedure
When an ISDN trunk party and ATTENDANT CONSOLE [A-3] are talking:
1. The Attendant presses the “CALL PARK” key; the CALL PARK number is automatically selected and
displayed at the ATTENDANT CONSOLE [A-3].
2. The Attendant receives Service Set Tone.
3. The Attendant presses either the “RELEASE” or “CANCEL” key.
Note:
If no CALL PARK numbers are available, Attendant receives Busy Tone and no number is displayed.
When an ISDN trunk party and a station user are talking:
1. The station user momentarily presses the switchhook; receives Special Dial Tone.
2. Dial the CALL PARK access code, the ISDN trunk connects to the called station is placed into call park
state; receives Service Set Tone.
3. Replace the handset.
To retrieve a Parked Call from the Setting Station:
1. Dial the CALL PARK local retrieval code; the parked call is reconnected.
To retrieve a Parked Call from a Different Station:
1. Dial the CALL PARK remote retrieval code and the number of the station which has parked the call; the
parked call is reconnected.
To retrieve a Parked Call set by ATTENDANT CONSOLE [A-3] from the station user.
1. Dial the CALL PARK remote retrieval code and call park number; the parked call is reconnected.