Filter
Top Products
NDA-24305 CHAPTER 5
Page 55
Revision 1.0
CALL FORWARDING-INTERCEPT/ANNOUNCEMENT-PRI
STEP 6: AAED - Used to assign Announcement equipment. Assign:
TN: Tenant Number;
EQP: Announcement Equipment Number
0: Dead Level
1: Unused Number (LCR OPR not programmed)
2: Available
3: Available
4: Outgoing Trunk Group Busy Announcement
5: Available
6: Available
7: Outgoing Route Restriction Announcement
8-15: Available for ANNOUNCEMENT SERVICE [A-15] applications.
RT, TK: Route & Trunk number of the trunk connected to the Announcement Equipment;
C: Duration of Connection, 0/1: Disconnection occurs in 30 seconds/the connection
is held until the station releases. See the requirements of the announcement
equipment.
R: Sending RBT, 0/1: Sending RBT/Not sending RBT. Normally assign data “0”.
A: Answer Signal Sending, 0/1: No answer from Incoming trunk/Answer from
Incoming trunk. Normally assign data “0”. No answer signal is sent to the CO.
Therefore calling party will not be billed for the call.
M: Multiple Connection 0/1: Single Connection/Multiple Connection. See the
requirements of the announcement equipment.
STEP 7: ACFR - Assignment of Call Forwarding Restriction. Upon determining which types of Call Class
Indexes (CCI) will be answered via CALL FORWARDING-INTERCEPT; for example,
DID call; allow that CCI a Transfer Service Feature Index of 1, for CALL
FORWARDING-ALL CALLS, DON’T ANSWER, BUSY.