Filter
Top Products
CHAPTER 6 NDA-24305
Page 256
Revision 1.0
CNIP/CONP
4. Programming
Name ID is assigned by ANDD command on each station number basis.
STEP 1: ASYD - System Data 1, Index 78, Bit 3: Station Number Display with 8-Character Name
Display. 0/1: Out/In Service.
System Data 1, Index 78, Bit 5: (1) Name Display in service.
System Data 1, Index 79, Bit 6: (0) OAI/ACD in service.
System Data 1, Index 241, Bit 1: User's Information Display service. 0/1: 8-Digit Display
Service/16-Digit Display Service.
STEP 2: ARTD - Assign route class data for the Q-SIG trunk route.
BT (CDN=43): 1
DPLY (CDN=50): 1
CI (CDN=98): 0
IND (CDN=112): 1
5. Interactions
Name ID is available for the following features:
• Call Forwarding - All Calls - CCIS
• Call Forwarding - Busy Line - CCIS
• Call Forwarding - Don't Answer - CCIS
• Step Call - CCIS
• Call Pickup
• Recalling of Call Hold
• Answering of Call Park
• Call Waiting
• Termination from UCD Queuing
• Outgoing Trunk Queuing
• Off-Hook Queuing
• Inter-Office Off-Hook Queuing