Filter
Top Products
CHAPTER 4 NDA-24305
Page 24
Revision 1.0
COMMANDS CONCERNING ISDN DATA ASSIGNMENT
ANI (CDN31) Timing to demand ANI Information
0 = There is no ANI demand at Incoming call
1 = After receiving 1st digit
2 = After receiving 2nd digit
3 = After receiving 3rd digit
4 = After receiving 4th digit
5 = After receiving 5th digit
6 = After receiving 6th digit
7 = After receiving 7th digit
SRV (CDN32) Additional Service Selection Note 7
Bit0: Advice of Charge (AOC)
0 = Valid
1 = Invalid
Bit1: Malicious Call Trace (MCT)/Malicious Call Identification (MCID)
0 = Valid
1 = Invalid
Bit2-Bit6: –
Bit7: For TON (CDN28) and/or NPI (CDN29)
0 = Invalid
1 = Valid
Note 7:
Input this data by a decimal.
TON (CDN33) Type of Number Note 8
0 = Unknown
1 = International Number
2 = National Number
3 = Network Special Number
4 = Subscriber Number
5=–
6 = Abbreviated Number
7 = Reserved for Extension
Note 8:
This data is effective when ARTD CDN65 (INT) = 4 and SRV (CDN27) bit7 = 1.
NPI (CDN34) Numbering Plan Identification Note 9
0 = Unknown
1 = ISDN/Telephony Numbering Plan
2=–
3 = Data Numbering Plan
4 = Telex Numbering Plan
5-7 = –
8 = National Standard Numbering Plan
9 = Private Numbering Plan
10-14 =–
15 = Reserved for Extension
Others =–
Note 9:
This data is effective when ARTD CDN65 (INT) = 4 and ARTI SRV (CDN27) bit7 = 1.