Filter
Top Products
CHAPTER 6 NDA-24305
Page 170
Revision 1.0
CALLING PARTY RECOGNITION SERVICE (CALL FORWARDING-ALL CALLS/BUSY LINE/DON’T ANSWER)
STEP 4: ASPA - Assign an access code for CALL FORWARDING.
CI: Common Status Index (N)
SRV: Kind of Service (Type in SSC)
SID: Service Feature Index
8- CALL FORWARDING-ALL CALLS (ENTRY)
9- CALL FORWARDING-ALL CALLS (CANCEL)
10- CALL FORWARDING-BUSY LINE (ENTRY)
11- CALL FORWARDING-BUSY LINE (CANCEL)
12- CALL FORWARDING-DON’T ANSWER (ENTRY)
13- CALL FORWARDING-DON’T ANSWER (CANCEL)
STEP 5: ACNP - Assign Calling Party Number Pattern Information
OG-IG: Outgoing/Incoming (Type in I = Incoming)
RT: Route Number
CNP: Calling Number Pattern (1~255)
STEP 6: ACND - Assign the Digit Code of the Additional Number.
CNP: Calling Number Pattern (1~255)
Enter the same value which has been assigned in the ACNP command.
SKIP: Skip Digit (0~24)-Number of digits for SID.
ADD: Number of Digits of the Additional Number (0~24)
Enter the number of digits (Number of digits for an access code to PRI) of the next
parameter (= DC).
DC: Digit Code of the Additional Number (0~24)
Enter the access code which is used to initiate seizure of the ISDN trunk.
STEP 7: AFCP - Assign the Call Forwarding Destination. (For More information, see the example on the
next page).
CALLING PARTY: (Max. 32 digits) Called Station Number (
Note 1
) + ACC (
Note 2
) +
Calling Party Number
CFSI: CALL FORWARDING Service Feature (0~3)
0-CALL FORWARDING-ALL CALLS
1-CALL FORWARDING-BUSY LINE
2-CALL FORWARDING-DON’T ANSWER
3-DIRECT-IN TERMINATION
ITC: Information Transfer Capacity (0~2)
0-Speech
1-Unrestricted (Digital Data)
Note 3
2-Audio (Modem)
CFD: Call Forwarding Destination (0~3)
0-Station
1-ATT
2-External
3-Not used
STN: Station Number of Call Forwarding Destination (Max. 5 digits)
Note 4
ADC: Abbreviated Digit Code (Max. 3 digits)
Note 5