Filter
Top Products
CHAPTER 6 NDA-24305
Page 254
Revision 1.0
CNIP/CONP
C-153 CNIP/CONP
1. General Description
In between Q-SIG networks, this feature allows calling or called party's information, called Name ID, to be
displayed on the D
term
LCD. This feature conforms to ETS 300 238. This feature is available for IS-11572
networks.
• Calling Name Identification Presentation (CNIP): Calling party's information (Name ID) is displayed on
the called party's D
term
LCD.
• Connected Name Identification Presentation (CONP): Called party's information (Name ID) is displayed
on the calling party's D
term
LCD.
This feature is also available when interworking with a CCIS interface.
2. Operating Procedure
No manual operation is required.
3. Service Conditions
1. This service is not available when:
• a tandem office is not provided with this feature or Name Display - System - CCIS [N-37].
• a call is routed through a signaling interface other than Q-SIG or CCIS.
2. The routes to the offices not provided with this feature must be separated from the routes to the offices
provided with this feature.
3. While hearing Ring Back Tone, Name ID of the called party is displayed on the calling party's D
term
LCD.
Note that the display is not changed even if the call is transferred using such features as CALL
FORWARDING - ALL CALLS.
4. When a call is transferred to another office using a forwarding feature such as CALL FORWARDING - ALL
CALLS - OUTSIDE, Name ID of the terminated station is displayed on the calling party's D
term
LCD.
5. Even if the called party is in busy or lockout state, the called party's Name ID is displayed on the calling
party's D
term
LCD. However, when the called party is in Do Not Disturb state, Name ID is not displayed.