Filter
Top Products
CHAPTER 6 NDA-24305
Page 268
Revision 1.0
CALL FORWARDING SUPPLEMENTARY SERVICE (SS-CF) WITH REROUTING
STEP 8: ARTI - Assign the trunk application data.
CDN52 : CTCF - 1 = SS-CT/SS-CF service is effective.
CDN53 : RERT - 1 = Rerouting function is effective.
•SS-CFB
STEP 1: ASFC - Assign the service feature class.
SFI=9 (Call Forwarding - Busy Line)RES=1 (Available)
STEP 2: ARSC - Assign the route restriction class.
STEP 3: ARRC - Allow the route connection between the outgoing route and the incoming route.
STEP 4: ASYD - Assign the system data concerned with the service.
SYS1, INDEX5, b0. Destination of Call Forwarding - Busy Line and Call Forwarding -
Don’t Answer
0/1 = Same/Separate
SYS1, INDEX5, b1-3. Maximum number of times that Multiple Call Forwarding - All
Calls/Busy Line occurrences.
Note:
This data is valid when SYS1, INDEX 69, bit 7 is assigned as “1 (Multiple Call Forwarding - Busy Line/
All Calls is in service)”.
SYS1, INDEX69, b7. Multiple Call Forwarding - Busy Line/All Calls
0/1 = Out/In Service
SYS2, INDEX1, b3. Toll Restriction for Speed Calling Station/Group services
0/1 = Required/Not Required
SYS2, INDEX1, b7. Speed Calling Override Service (System basis)
0/1 = Required/Not Required
STEP 5: ANPD - Reserve a number level for the feature access and cancel.
STEP 6: ASPA - Assign the access code for the Call Forwarding - Busy Line.
SRV=SSC, SID=10(Call Forwarding - Busy Line; Entry)
SRV=SSC, SID=11(Call Forwarding - Busy Line; Cancel)
STEP 7: ARTI - Assign the trunk application data.
CDN52 : CTCF - 1 = SS-CT/SS-CF service is effective.
CDN53 : RERT - 1 = Rerouting function is effective.