Filter
Top Products
NDA-24305 CHAPTER 5
Page 45
Revision 1.0
CALL FORWARDING-BUSY LINE-PRI
C-96 CALL FORWARDING-BUSY LINE-PRI
1. General Description
This feature permits a call to a busy station to be immediately forwarded to a predesignated station or to the
ATTENDANT CONSOLE [A-3].
If a called station is in a hunt group and forwards calls to another hunt group, it can be determined by system
data, whether the calling party is directed to the called parties hunt group or the terminating parties hunt group
when all of the forwarded stations are busy.
2. Operating Procedure
To set CALL FORWARDING-BUSY LINE-PRI from an Individual Station:
1. Lift the handset; receive Dial Tone.
2. Dial the specific CALL FORWARDING-BUSY LINE-PRI access code; receive Special Dial Tone.
3. Dial the desired target station number; receive Service Set Tone.
To cancel CALL FORWARDING-BUSY LINE-PRI from an Individual Station:
1. Lift the handset, receive Dial Tone.
2. Dial the specific CALL FORWARDING-BUSY LINE-PRI cancel code; receive Service Set Tone.
To set CALL FORWARDING-BUSY LINE-PRI from the ATTENDANT CONSOLE [A-3]:
1. Press an idle “LOOP” key.
2. Dial the specific CALL FORWARDING-BUSY LINE-PRI access code; receive Special Dial Tone.
3. Dial the TENANT SERVICE [T-12] number (2 digits).
4. Dial the originating station number.
5. Dial the desired target station number; receive Service Set Tone.
To cancel CALL FORWARDING-BUSY LINE-PRI from the ATTENDANT CONSOLE [A-3]:
1. Press an idle “LOOP” key.
2. Dial the specific CALL FORWARDING-BUSY LINE-PRI cancel code.
3. Dial the TENANT SERVICE [T-12] number (2 digits).
4. Dial the originating station number; receive Service Set Tone.
3. Programming
STEP 1: ASYD - System Data 1, Index 5, bit 0: Access codes for CALL FORWARDING-BUSY LINE
and CALL FORWARDING-DON’T ANSWER are same
or separate? 0/1: Same/Separate.
bit 5: Hunting Group when transferred party is busy (Station
Hunting after C.F.-Busy Line) 0/1: Hunt in Transferring
Party’s Group/Hunt in Transferred Party’s Group
bit 7: Multiple Call Forwarding Service 0/1: Out/In Service
STEP 2: ANPD - Reserve a number level for feature access and cancel. Assign Connection Index, CI=N;
Normal. Assign NND in accordance with a predetermined numbering plan.