Filter
Top Products
NDA-24305 CHAPTER 5
Page 135
Revision 1.0
RESTRICTION FROM OUTGOING CALLS-PRI
R-35 RESTRICTION FROM OUTGOING CALLS-PRI
1. General Description
This feature automatically denies preselected station lines within the system the ability to place outgoing ISDN
calls without Attendant assistance.
2. Operating Procedure
Operation is fully automatic in that restricted stations; will receive Reorder Tone upon attempting to place a
restricted call.
3. Programming
STEP 1: ASYD - System Data 1, Index 75: Should the following commands be developed for Day/
Night? 0/1:No/Yes.
Bit 0-Develop ARSC command for Day/Night?
Bit 3-Develop ATDP command for Day/Night?
System Data 2, Index 1, bits 4&5: Should a Toll-Restricted station be routed to the
Attendant Console or receive Reorder Tone?
Reorder Tone: bit 4 = “0”, bit 5 = “0”.
Attendant Console: bit 4 = “0”, bit 5 = “0”.
ROUTE RESTRICTION CLASS
STEP 2: ARSC - Sixteen different Route Restriction Classes may be constructed to either allow, deny, or toll
restrict access to the various routes of the system. Assign the RSC using Route Restriction
Indexes 2 (outgoing via the Attendant Console) and 3 (Outgoing Direct).
STEP 3: ASDT - Assign Tenant No., Station No., LENs, and the Telephone Equipment Class (TEC) to the
station. This is used in regular Business systems. The Service Feature Class (SFC) and
Route Restriction Class (RSC) are also assigned to the telephone.
TN: Tenant Number
STN: Station Number
LEN: Line Equipment Number (6 digits)
TEC: Telephone class (1-31)
1 - DP (10pps)
2 - BP
3 - DP/PB
4 - DP (20pps)
12 - D
term
13 - Data terminal Via D
term
14 - Hot Line
15 - CAS Line
18 - Virtual Circuit
23 - ISDN Terminal
27 - 8 Conference Equipment
RSC: Route Restriction Class (0-15) For assignment of RSC, ARSC command.
SFC: Service Feature Class (0-15) For assignment of SFC, ASFC command.