Filter
Top Products
CHAPTER 3 NDA-24305
Page 10
Revision 1.0
BASIC DATA ASSIGNMENT FOR ISDN
STEP 3: ATRK - Assign the trunk data for Bch only here. Note that the data assignment for Dch must be
performed after the ACSC command assignment.
- How Bch and Dch LEN appear in PIM is shown in Figure 3-1 and Figure 3-2.
- As seen from those Figures, the number of B-channels and D-channels are:
24 PRT (B channel × 23, D channel × 2)
- Regarding the route number of the Bch assigned by the ARTD command, assign the Bch’s
trunk number and Line Equipment Number (LEN).
Note:
The above is for the basic (minimum) data. Refer to Chapter 4, ”Commands Concerning ISDN Data
Assignment” for others.