Filter
Top Products
NDA-24305 CHAPTER 5
Page 53
Revision 1.0
CONSULTATION HOLD-ALL CALLS-D
term
-PRI
C-100D CONSULTATION HOLD-ALL CALLS-D
term
-PRI
1. General Description
This feature permits a D
term
station user to hold any incoming or outgoing ISDN network calls while originating
a call to another station within the system.
2. Operating Procedure
To hold the original call and place second call from a D
term
:
1. Press the “TRANSFER” key; receive Special Dial Tone.
2. The original call is held.
3. Dial the second station number; receive Ringback Tone.
4. The Second station answers; the consultation hold state has been entered.
To return to the original call from a D
term
:
1. In any of the following cases, the calling station can return to the original call by pressing the “TRANSFER”
key:
(a) Second station called for consultation is busy.
(b) Calling station cannot access to the second station due to a restriction or some other reason.
2. If the second station hangs up, the calling station will automatically be returned to the original call.
3. If the second station stays on, pressing the “TRANSFER” key returns the original call to the D
term
while the
second call is being held.
Press the “CONF” key to initiate THREE-WAY CALLING [T-2].
3. Programming
Refer to [C-100] “CONSULTATION HOLD-ALL CALLS-PRI” in this manual.