Filter
Top Products
NDA-24305 CHAPTER 6
Page 173
Revision 1.0
CALLING PARTY RECOGNITION SERVICE [DIRECT-IN TERMINATION (DIT)]
STEP 6: AFCP - Assign the transfer destination.
(For more information, see Figure 6-1.)
DAY/NIGHT: Day mode/Night mode
TN: TENANT NUMBER
CALLING PARTY: (Max. 32 digits) Called Station Number (
Note 1
) + ACC (
Note 2
) +
Calling Party Number
CFSI: Call Forwarding Service Feature (0~3)
0-CALL FORWARDING-ALL CALLS
1-CALL FORWARDING-BUSY LINE
2-CALL FORWARDING-DON’T ANSWER
→ 3-DIRECT-IN TERMINATION
ITC: Information Transfer Capacity (0~2)
0-Speech
1-Unrestricted (Digital Data)
Note 3
2-Audio (Modem)
CFD: Call Forwarding Destination (0~3)
0-Speech
1-ATT
2-External
3-Not used
STN: Station Number of the Destination (Max. 5 digits)
Note 4
ADC: Abbreviated Digit Code (Max. 3 digits)
Note 5
Note 1:
Assign Called Station Number by the physical station number PCS terminal’s number cannot be
assigned here.
Note 2:
Enter the Access Code assigned in the ACND command (DC).
Note 3:
This data (=1) can be assigned when the CFSI is DTI (=3).
Note 4:
This parameter appears when the input data in the CFD is 0.
Note 5:
This parameter appears when the input data in the CFD is 2.