Filter
Top Products
NDA-24305 CHAPTER 5
Page 77
Revision 1.0
DATA UNIFORM NUMBERING PLAN-PRI
3. Programming
STEP 1: Assign the Basic Data for ISDN. (Refer to Chapter 3, “Basic Data Assignment for ISDN”)
STEP 2: AUNE - Assign Uniform Numbering Data in a terminating office.
<Example>
Uniform Numbering
Inter-office coordinate Numbering
STEP 3: AMND- Assign DC (Destination Code) including ACC and/or Uniform No. and MND (Necessary
Number of digits)
STEP 4: RRC - Allow the restriction between Incoming PRI and Dummy route.
A/D=D
8+632+5XXX
Station No.
Uniform No.
LCR Access Code
Skip Digits
632 + 5XXX
Station No.
Uniform No.
Skip Digits