Filter
Top Products
CHAPTER 6 NDA-24305
Page 212
Revision 1.0
CALLING PARTY INFORMATION TRANSFER/TRANSFER MESSAGE (TRM)
STEP 5: ADPC - Assignment of Determinate Point Code Data.
Note
Setting of the counter office point code
RT: Route Number
PC: Determinate Point Code (1-16367)
STEP 6: ATRK - Assignment of Trunk Data
Note
Assign of the LENS of the trunks to be used in CCIS
LENS: Line Equipment Number (6 digits)
STEP 7: ACSC - Assignment of CSC Data
Note
Setting of CCH/CSE Number of the route to be used in CCIS
CSCG: CSC Group Number (130~255)
CIC GROUPPX: Circuit Identification Code Group Number (0~7)
CCH: Accommodation location of the Common Channel Handler
CCH: XX X XX
*a *b *c
*a: Module Group Number (00~07)
*b: Unit Number (0~3)
*c: Group Number (0~23)
STEP 8: ACIC1 - Assignment of CIC Data
Note
Setting of CIC of each trunk to be used in CCIS
PC: Determinate Point Code (1-16367)
CSCG: Common Channel Signalling Controller Group Number (130~255)
STEP 9: ACIC2 - Assignment of CIC Data 2
Note
PC: Determinate Point Code
CIC: Circuit Identification code Number (1~999)
LENS: Line Equipment Number (6 Digits)
LENS: XX X XX X
*a *b *c *d
*a: Module Group Number (00~07)
*b: Unit Number (0~3)
*c: Group Number (0~23)
*d: Level Number (0~7)
STEP 10: ARNP - Assignment of Reverse Numbering Plan Data
Assignment of the office code of the self office if necessary.
RT: Route Number (RT=0)
ACC: Access Code (maximum 3 digits)
Note:
For details, see “No. 7 CCIS System Manual”.