NEC NDA-24305 Cell Phone User Manual


 
NDA-24305 CHAPTER 5
Page 43
Revision 1.0
CALL FORWARDING-ALL CALLS-D
term
-PRI
To cancel CALL FORWARDING-ALL CALLS-D
term
-PRI from My-line:
1. Lift the handset or press the “SPEAKER” key; receive Dial Tone.
2. Press the CALL FORWARDING-ALL CALLS-D
term
-PRI feature key; receive Service Set Tone.
The LED of the associated feature key will go out. The LCD displays:
3. Replace the handset or press the “SPEAKER” key.
To set CALL FORWARDING-ALL CALLS-D
term
-PRI for multi-line appearance other than the My-line:
1. Lift the handset or press the “SPEAKER” key.
2. Press the multi-line appearance; receive Dial Tone. Then press CALL FORWARDING-ALL CALLS-D
term
-
PRI feature key; receive Special Dial Tone.
3. Dial the desired target station number; receive Service Set Tone. The LED of the associated feature key does
not light at the station setting the service. If the multi-line appearance is another D
term
’s My-line, that
station’s feature key LED will light. The setting station’s LCD displays:
4. Replace the handset or press the “SPEAKER” key.
5. If the target station is the Attendant, the LCD displays:
To monitor CALL FORWARDING-ALL CALLS-D
term
-PRI for a multi-line appearance other than the My-
line:
1. Press the multi-line appearance. Then press the CALL FORWARDING-ALL CALLS-D
term
-PRI feature
key. The LCD displays:
FWD CNCL
(Time Display)
FORWARD CANCEL
(Time Display)
[D
term
Series III] [D
term
Series E]
FWD SET XXXX
(Time Display)
TA RG ET
STATION
FORWARD SET XXXX
(Time Display)
TA RG ET
STATION
[D
term
Series III] [D
term
Series E]
FWD SET OPR
(Time Display)
FORWARD SET OPR
(Time Display)
[D
term
Series III] [D
term
Series E]
FWD SET XXXX
(Time Display)
TA RG ET
STATION
FORWARD SET XXXX
(Time Display)
TA RG ET
STATION
[D
term
Series III] [D
term
Series E]