Filter
Top Products
CHAPTER 6 NDA-24305
Page 166
Revision 1.0
SUPPLEMENTARY SERVICE
STEP 5: ACSC - Assign the location of DCH (Dch handler) and Bch. (Refer to the following example)
STEP 6: ACIC1 - Assign CSCG corresponding to PC (Point Code). (Refer to the following example)
PC=11 CSCG=132
STEP 7: ATRK - Assign the trunk data for Dch.
STEP 8: ARTI - Assign the Trunk Application data.
If the H0 terminal does not provide the initial setup procedure conforming to Q931 protocol, assign the
following data.
CDN 2 (RST)=3 Assignment of Restart
0: Restart Send per Individual Channel
1: –
2: –
3: Restart not Send
Note:
Circuit Card must be initialized after these assignment.
PIM0
24
P
R
T
Group
No.
09 11
08 10
Dch
Bch
CSCG CICG DCH/CCH
CSCG=132 0 00008
1 00008
2 00008
3 00008
4 00008
5 00008
6 00008
7 00008
CSCG=133 0 00008
1 00008
2 00008
3 00008
4 00008
5 00008
6 00008
7 0008