Filter
Top Products
3A. Sprint Service: The Basics 129
Sprint Service
To turn Call Guard on or off:
1. Press > and tap Settings > Wireless
controls > Mobile networks.
2. Touch Call Guard to toggle the active state of this
function. When active, an extra key press is
required for dialing when in a roaming area.
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the
seven-digit number and tap .
2. Touch OK.
To answer incoming roaming calls with Call Guard on:
1. Tap . (A message is displayed
notifying you that roaming charges will apply.)
2. Tap OK.
Data Roam Guard
Depending on service availability and roaming
agreements, your device may be able to access data
services while roaming on certain digital systems. You
can set your device to alert you when you are roaming
off the Nationwide Sprint Network and try to use data
services such as messaging.
To set your Data Roam Guard notification:
1. Press > and tap Settings > Wireless
controls > Mobile networks.
2. Tap Data Roaming Guard.
3. Tap an onscreen option.
Ⅲ Default sets your device’s Data Roam Guard
feature to its default state (Always Ask).
Ⅲ Always Ask sets your device’s Data Roam Guard
feature on. You will see a prompt and are required
to respond anytime you access data services
while roaming.
Note: Call Guard is turned on by default on your device.
Voice dialing and speed dialing are not available when
you are roaming with Call Guard enabled.
Note: If the Call Guard feature is set to On, you need to take
extra steps to make and receive roaming calls.
1234567
1234567
Note: Data Roam Guard is turned on by default on your
device.
SPH-M900.book Page 129 Thursday, October 29, 2009 3:51 PM