Filter
Top Products
2A. Device Basics 33
Phone Basics
ⅷ Mute to mute the microphone during an active call.
Tap again to unmute the microphone.
ⅷ Speaker to route the device’s audio through the
speaker (
On) or through the earpiece (Off).
ᮣ Activate Speaker to route the device’s audio
through the speaker. (You can adjust the speaker
volume using the volume keys.)
ᮣ Deactivate Speaker to use the device’s earpiece.
ⅷ Bluetooth to route the device’s audio through the
connected Bluetooth headset (
On) or through the
speaker (
Off).
Ⅲ When the call is routed to a Bluetooth headset,
the current call area is surrounded by a blue box
and shows the
Bluetooth call icon ( ).
Ⅲ When turned off, the call is routed through either
the earpiece or speaker, the call area is
surrounded by a green box and shows ( ).
End-of-Call Options
After you receive a call from or make a call to a phone
number that is not in your Contacts, the device displays
the phone number and the duration of the call within
the Call log screen.
From the Call log tab, tap an entry from the list:
ⅷ <Call type> to view the category of the selected call:
Incoming call, Outgoing call, or Missed call.
ⅷ Call back or Call again to redial the selected number
and callback the recipient.
ⅷ Send SMS message to send the selected number an
SMS (text) message.
Note: If Mute is activated, the speaker mode is deactivated.
WARNING: Because of higher volume levels, do not place
the device near your ear during speakerphone
use.
Bluetooth routed Device routed
SPH-M900.book Page 33 Thursday, October 29, 2009 3:51 PM