Filter
Top Products
224 Chapter 12 Camera and Multimedia
12.5 Using FM Radio
FM Radio lets you to listen to FM radio stations on your phone. Since
FM Radio uses the provided stereo wired headset as the antenna,
connect the headset first to the earphone jack of your phone before
you open the program.
To open FM Radio, tap Start > Tools > FM Radio.
The first time you open FM Radio, it automatically scans for available
FM stations, saves them as presets, and plays the first FM station
found. For information about saving favorite stations as presets, see
“Saving presets.”
1
Search the FM band for the next lower or
higher FM station.
2
Fine tune the radio frequency by -0.1 MHz.
3
Select headset or speaker audio output.
4
Select mono or stereo audio.
5
Preset FM stations. Tap a station to tune in.
6
Set FM Radio options, such as Scan and
Save, mute the audio, and select the audio
output.
7
Turn the sound on or off.
8
Fine tune the radio frequency by +0.1 MHz.
9
Station preset number (if you saved the
station as preset)
10
Turn off FM radio.
9
2
5
3
7
6
10
4
1
8
Tip Press the VOLUME UP and VOLUME DOWN buttons on the side of the
phone to adjust the volume.