Filter
Top Products
Copyright © 2004 Nokia. All rights reserved.
Extras
160
The codes are shown as asterisks. If you are changing a code, you will be prompted
for the current code and then the new code twice.
PIN code request: If you set the PIN code request On, the communicator requests
that you enter the code every time you turn on the phone. If you enter the
PIN code incorrectly three times in succession, you will need a PUK code
to unblock the SIM card. When the SIM card is blocked, you cannot send
or receive any documents or calls except calls to preprogrammed
emergency numbers. Otherwise, the communicator can be used normally.
You need the PIN code to change this setting.
Note: This setting cannot be changed, if the phone is switched off or if there is
no valid SIM card inserted.
Note: Some SIM cards do not allow you to turn the PIN code request off.
Autolock period: Determines the security time-out period, after which the
communicator will lock. The options are None/2 minutes/5 minutes/10
minutes. The last option allows you to define the number of minutes
yourself. When the communicator is locked, you can make emergency calls
to predefined numbers using the cover phone. You can also answer
incoming calls and make emergency calls using the Telephone application.
All other actions are blocked. The timer is reset by any input, data transfer,
printing, and so on. You need the lock code to change this setting.
Lock if SIM card is changed: If set On, every time the phone is switched on this
security option checks whether the SIM card in the communicator has
been changed. If the SIM card has been changed and the new SIM card has
not been used with your communicator previously, the communicator
locks itself until the lock code is correctly entered. The communicator
recognises five different SIM cards as the owner’s cards. You need the lock
code to change this setting.
Tip: Changing the PIN code requires that PIN code request is selected, the phone
is on, and that there is a valid SIM card inserted.
PIN code: This setting allows you to change the PIN code. The new PIN code must
be from 4 to 8 digits long.
PIN2 code: This setting allows you to change the PIN2 code. The PIN2 code is
required to access some functions, such as the call cost settings, which
must be supported by your SIM card. If you enter an incorrect PIN2 code
three times in succession, you will need a PUK2 code to unblock the PIN2
code. The new PIN2 code must be from 4 to 8 digits long.
LindaDeepak_ri.fm Page 160 Monday, September 27, 2004 2:34 PM