Filter
Top Products
Copyright © 2004 Nokia. All rights reserved.
175
Extras
Before your PC can recognise the communicator as a fax modem, you need to install
a new modem configuration for your PC. Please refer to your operating system
manual for more information. During the installation you may be asked to enter the
path to the modem information file. The path on the sales package CD-ROM is: \
Software for PC \ Printer and Modem drivers. Advanced users can also find a list of
supported AT commands from this path. Normally there is no need to use these
commands.
Note: Using the communicator as a fax modem requires that data calls are
supported by the network operator and that this service is active in your
SIM card.
To install fax modem driver using cable connection
1 Start Windows.
2 Insert the Nokia 9210 CD-ROM into the CD-ROM drive of the computer and
locate the modem information file (mdmn9210.INF). Alternatively, you can find
the file on the www.forum.nokia.com Web site.
3 Double-click the Modems icon in the Windows Control Panel. A dialog opens. If
no modem drivers have been installed on the computer before, continue from
step 6.
4 Click the Add button.
5 In the field What type of modem do you want to install? select Other. Click Next
6 Select the option Don’t detect my modem; I will select it from a list
7 Click Have disk...
8 Click Browse and locate the CD-ROM drive with the Nokia 9210 CD-ROM.
9 On the CD-ROM, locate a folder Software for PC/Modem drivers
10In the Modem drivers folder, select Mdmn9210.inf file and click Open or OK.
Tip: To use High Speed connection, your GSM operator must activate High Speed
Data Services on your SIM card.
11In the Install from disk dialog, Click OK.
12In the Install New Modem dialog, select Nokia 9210 Communicator (Cable). If you
are using High Speed connection (HSCSD), select a speed higher than 9600 bps
and cable connection. Click Next.
13Select the COM port where the serial cable is connected. Click Next.
14Click Finish.
15Remove the CD-ROM from the drive.
16In your communicator, press the Extras application button, select Fax modem,
and press Open.
17In the Fax modem application, press Settings
18On the Connection page of the Fax modem settings, define the following:
LindaDeepak_ri.fm Page 175 Monday, September 27, 2004 2:34 PM