Filter
Top Products
Copyright © 2004 Nokia. All rights reserved.
27
General information
To insert special characters from the character table
1 Press and release the Chr key. A dialog opens.
2 Press the Menu key to select the page with the character you want to insert.
3 Select the special character or characters, then press Insert.
To insert special characters from the keyboard
There are two ways to insert special characters directly from the keyboard.
To insert a characters printed on the keys with green colour, press and hold the Chr
key and simultaneously press a key with a special character printed in green.
To generate special characters by using certain unmarked keys, for example, “a” and
“e”, do as follows:
1 Press and hold the Chr key and simultaneously press a letter key. The first special
character matching the letter key is displayed.
2 Continue to hold down the Chr key and press the letter key again. The second
special character is shown in place of the first one, and so on, until the first
character is shown again.
Press Shift or the Caps lock key to change the case of the special character.
Shortcuts
Tip: Many shortcuts are also displayed next to menu commands in applications.
There are several shortcuts you can use in the document applications. The shorcuts
vary depending on the application used. The following table lists some of the
available shortcuts:
Shortcut Function
Ctrl + a
Ctrl + c
Ctrl + x
Ctrl + v
Ctrl + z
Selects all
Copies selected text
Cuts selected text
Pastes selected text
Undoes (the last action)
Ctrl + b
Ctrl + i
Ctrl + u
Applies bold
Applies italics
Applies underlining
LindaDeepak_ri.fm Page 27 Monday, September 27, 2004 2:34 PM