Filter
Top Products
Copyright © 2004 Nokia. All rights reserved.
183
Troubleshooting
If you are unable to connect to the Internet after repeated attempts, and have
successfully used your Internet connection previously, or get error messages when
starting the WWW browser, remove and replace the battery and try again.
12. Infrared problems
The communicator may be connected to a PC, laptop, printer, digital camera,
wireless phone or another communicator via the infrared connection.
If you are using the PC Suite for Nokia 9210 Communicator program on your PC, or
if you want to receive data from another communicator or a digital camera, you
must activate the Infrared connection on your communicator before the connection
is made. See PC Suite Guide in the sales package CD-ROM and ’To activate the
infrared connection’ on page 33 of this guide.
The PC to which you want to establish the connection must have an IrDA
compatible infrared port; installed and activated IrDA drivers; and Microsoft
Windows 95/98/98SE/Me. For more information on IrDA drivers and their use in
Windows, contact Microsoft.
If you have an IBM Thinkpad laptop with Windows 98 SE installed, you may
encounter problems with infrared connections. If problems occur, proceed as
follows:
1 Click the Windows Start button and select Settings > Control Panel.
2 In the Windows 98 Control Panel, open System.
3 In the System properties dialog, select the Device Manager tab.
4 Under Network Adapters, select IBM Thinkpad Fast Infrared Port and click the
Properties button. IBM Thinkpad Fast Infrared Port Properties dialog opens.
5 Click the Driver tab and then click the Update Driver... button. Update Device
Driver Wizard starts.
6 Click Next.
7 Select the Install one of the other drivers option and click the View List... button.
8 Infrared PnP Serial Port has been found. Click OK.
9 Click Next.
10Infrared PnP Serial Port is ready to be installed. Click Next.
11The new driver has been installed. Click Finish.
12The computer must be restarted before the new driver can be taken to use. Click
Yes to restart the computer.
13. Printing problems
If you are using the infrared connection, the infrared port of the printer must be
compatible to the IrDA standard. See ’To print’ on page 30.
LindaDeepak_ri.fm Page 183 Monday, September 27, 2004 2:34 PM