Filter
Top Products
Copyright © 2004 Nokia. All rights reserved.
161
Extras
Lock code: This setting allows you to change the lock code. The default lock code is
12345. The new lock code must be from 5 to 10 digits long. If you enter
an incorrect lock code five times in succession, the phone will be locked
for five minutes after which you can try again. If you try again within less
than five minutes, you have to wait five minutes more before a code can
be accepted.
Tip: Changing the barring password requires that the phone is on and the Call
barring service is activated for your SIM card.
Barring password: This setting allows you to change the barring password. If you
enter an incorrect password three times in succession, the password is
blocked and you must ask the network service provider for a new
password.
Note: Avoid using codes that are similar to emergency numbers to prevent
accidental dialling of the emergency number.
Note: Even when the communicator is locked, it is possible to call to the
emergency number preprogrammed into the phone (for example, 112 or
other official emergency number).
Data call barring
Tip: Use data call barring to limit the use of the phone, if you borrow it to
someone temporarily.
Here you can prevent or allow the following data call types:
Note: You need a barring password to modify these settings.
Outgoing calls: When activated, prohibits making data calls.
Incoming calls: When activated, prohibits receiving data calls.
International calls: When activated, prohibits making international calls.
Tip: To check the current status of a barring option, select the option and press
Check status.
Incoming calls when abroad: When activated, prohibits receiving calls when abroad.
International except to home country: When activated, prohibits making
international calls to all countries except to the country that has been
defined as the home country.
Note: Calls described here as international may in some cases be made between
regions of the same nation.
LindaDeepak_ri.fm Page 161 Monday, September 27, 2004 2:34 PM