Filter
Top Products
Copyright © 2004 Nokia. All rights reserved.
Phone
48
Settings (Menu 3)
Call settings (3-1)
Anykey answer (3-1-1)
When selected, you can answer an incoming call by pressing any key on the keypad,
except , , , Mute selection key, or the blank selection key.
Automatic redial (3-1-2)
When this function is selected and you call a number that is busy or does not
answer, the phone will attempt to call the number until the call is connected. The
maximum number of redials is 10.
Press to end the call attempts.
Speed dialling (3-1-3)
When selected, you can dial phone numbers stored in the speed dial locations by
simply pressing and holding the assigned speed dial key. See ’Speed dials’ on page
64 for more information.
Call waiting service (3-1-4)
Call waiting is a network service. Contact your operator for subscription. For more
information see ’To answer a waiting call’ on page 60.
Choose Activate to enable call waiting, Cancel to disable call waiting, or Check status
to show whether call waiting is active and for which call types.
My number sending (3-1-5)
This network service allows you to set your phone number either to be displayed or
to be hidden from the person you are calling. Set by network resets the phone to the
default setting, On or Off, that you have agreed upon with your service provider.
Summary after call (3-1-6)
If you set this function to On, the phone will briefly display the duration and cost
(network service) after each call.
Line for outgoing calls (3-1-7)
If your network supports this service, you can have two phone lines in your
communicator. You can select which line you want to use for making calls. For more
information, see ’Line selection page’ on page 70.
LindaDeepak_ri.fm Page 48 Monday, September 27, 2004 2:34 PM